Broyeur à disques
PULVERISETTE 13
premium lineVeuillez tenir compte des points suivants : Chaque broyeur à disques FRITSCH PULVERISETTE 13 premium line doit être équipé au moins d'un disque de broyage fixe et d'un disque de broyage mobile. Ils sont disponibles en 4 matériaux différents. En règle générale, les disques de broyage choisis sont du même matériau, dont la dureté doit toujours être supérieure à celle de l'échantillon à broyer.
Le broyeur à disques PULVERISETTE 13 premium line est également disponible avec un revêtement intérieur intégral de la chambre de broyage en polymère, lorsque le broyage doit avoir lieu sans métaux.
Matériau | Composant principal du matériau | Densité en g/cm³ écartement |
Résistance à l'abrasion | Type d'échantillon |
acier moulé trempé | Fe – Cr | 3,85 | bonne | échantillons durs, cassants |
acier au manganèse | Fe - Mn | 7,9-8 | bonne | échantillons très durs, cassants |
métal dur carbure de tungstène | WC | 14,05 | très bonne | échantillons très durs, abrasifs |
oxyde de zirconium | ZrO2 | 5,7 | bonne | échantillons mi-durs, cassants broyage sans métaux |
Veuillez choisir au moins un disque de broyage fixe et un disque de broyage mobile. Ils sont disponibles en 4 matériaux différents. Les disques de broyage en oxyde de zirconium sont adaptés uniquement au broyage des matériaux céramiques, minéraux et équivalents, mais en aucun cas à celui des échantillons durs et tenaces, en métal par exemple.
for the comminution of hard, brittle samples
General material specification:
Material: hardened steel cast - 1.2602
Abrasion resistance: good
Suitable for: hard, brittle samples
Detailed information about the material you will find in the element analysis.
General specifications | |
Material | Cast steel, hardened – 1.2602 |
ISO/EN/DIN code | GX165CrMoV12 |
Chemical composition | |
Element | Share % |
Iron – Fe | 85.94 - 83.59 |
Carbon – C | 1.55 – 1.75 |
Silicon – Si | 0.25 – 0.4 |
Manganese – Mn | 0.2 – 0.4 |
Phosphorus – P | 0.03 |
Sulphur – S | 0.03 |
Chromium – Cr | 11 - 12 |
Molybdenum – Mo | 0.5 – 0.7 |
Vanadium – V | 0.1 – 0.5 |
W | 0.4 -0.6 |
Physical and mechanical properties | |
Density | 3.85 g/cm³ |
Hardness | 60 HRC |
for the comminution of hard, brittle samples
General material specification:
Material: hardened steel cast - 1.2602
Abrasion resistance: good
Suitable for: hard, brittle samples
Detailed information about the material you will find in the element analysis.
General specifications | |
Material | Cast steel, hardened – 1.2602 |
ISO/EN/DIN code | GX165CrMoV12 |
Chemical composition | |
Element | Share % |
Iron – Fe | 85.94 - 83.59 |
Carbon – C | 1.55 – 1.75 |
Silicon – Si | 0.25 – 0.4 |
Manganese – Mn | 0.2 – 0.4 |
Phosphorus – P | 0.03 |
Sulphur – S | 0.03 |
Chromium – Cr | 11 - 12 |
Molybdenum – Mo | 0.5 – 0.7 |
Vanadium – V | 0.1 – 0.5 |
W | 0.4 -0.6 |
Physical and mechanical properties | |
Density | 3.85 g/cm³ |
Hardness | 60 HRC |
for the comminution of very hard, brittle samples
General material specification:
Material: manganese steel - 1.3401
Abrasion resistance: good
Suitable for: very hard, brittle samples
Detailed information about the material you will find in the element analysis.
General specifications | |
Material | Manganese steel – 1.3401 |
ISO/EN/DIN code | X120Mn12 |
Chemical composition | |
Element | Share % |
Iron – Fe | 83.56 -85.96 |
Chromium – Cr | < 1,50 |
Silicon – Si | 0,3–0,5 |
Manganese – Mn | 12,0–13.0 |
Carbon – C | 1.1 -1.3 |
Phosphorus – P | < 0.1 |
Sulphur – S | < 0.04 |
Physical and mechanical properties | |
Density | 7.9–8 g/cm³ |
Hardness | 27–32 HRC |
for the comminution of very hard, brittle samples
General material specification:
Material: manganese steel - 1.3401
Abrasion resistance: good
Suitable for: very hard, brittle samples
Detailed information about the material you will find in the element analysis.
General specifications | |
Material | Manganese steel – 1.3401 |
ISO/EN/DIN code | X120Mn12 |
Chemical composition | |
Element | Share % |
Iron – Fe | 83.56 -85.96 |
Chromium – Cr | < 1,50 |
Silicon – Si | 0,3–0,5 |
Manganese – Mn | 12,0–13.0 |
Carbon – C | 1.1 -1.3 |
Phosphorus – P | < 0.1 |
Sulphur – S | < 0.04 |
Physical and mechanical properties | |
Density | 7.9–8 g/cm³ |
Hardness | 27–32 HRC |
for the comminution of very hard, abrasive samples
General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: very hard, abrasive samples
Detailed information about the material you will find in the element analysis.
General specifications | |
Material | Tungsten carbide - WC |
ISO/EN/DIN code |
Chemical composition | |
Element | Share % |
Tungsten carbide – TC | 85.00 |
Cobalt – Co | 15.00 |
Physical and mechanical properties | |
Density | 14.05 g/cm³ |
Hardness | 1020 HV10 |
for the comminution of very hard, abrasive samples
General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: very hard, abrasive samples
Detailed information about the material you will find in the element analysis.
General specifications | |
Material | Tungsten carbide - WC |
ISO/EN/DIN code |
Chemical composition | |
Element | Share % |
Tungsten carbide – TC | 85.00 |
Cobalt – Co | 15.00 |
Physical and mechanical properties | |
Density | 14.05 g/cm³ |
Hardness | 1020 HV10 |
for the comminution of medium-hard, brittle samples and metal-free grinding
General material specification:
Material: zirconium oxide ZrO2
Abrasion resistance: good
Suitable for: medium-hard, brittle samples, metal-free grinding
Detailed information about the material you will find in the element analysis.
Grinding disks of zirconium oxide are only suitable for grinding ceramic materials, minerals etc. and never for hard-tough samples, such as metals.
General specifications | |
Material | Zirconium oxide – ZrO2 |
ISO/EN/DIN code |
Chemical composition | |
Element | Share % |
Zirconium oxide – ZrO2 | 94.5 |
Yttrium oxide – Y2O3 | 5.1 |
SiO2, CaO, MgO, Al2O3 | < 0.4 |
Physical and mechanical properties | |
Density | 6.0 g/cm³ |
Hardness | 12.5 x 10³ Nmm-² HV |
for the comminution of medium-hard, brittle samples and metal-free grinding
General material specification:
Material: zirconium oxide ZrO2
Abrasion resistance: good
Suitable for: medium-hard, brittle samples, for metal-free grinding
Detailed information about the material you will find in the element analysis.
Grinding disks of zirconium oxide are only suitable for grinding ceramic materials, minerals etc and never for hard-tough samples, such as metals.
General specifications | |
Material | Zirconium oxide – ZrO2 |
ISO/EN/DIN code |
Chemical composition | |
Element | Share % |
Zirconium oxide – ZrO2 | 94.5 |
Yttrium oxide – Y2O3 | 5.1 |
SiO2, CaO, MgO, Al2O3 | < 0.4 |
Physical and mechanical properties | |
Density | 6.0 g/cm³ |
Hardness | 12.5 x 10³ Nmm-² HV |
Idéal pour les techniques médicales et dentaires : Nous équipons en option votre broyeur PULVERISETTE 13 premium line d'un revêtement interne intégral en polymère, ainsi que de disques de broyage en oxyde de zirconium : garantie absolue pour un broyage de l'échantillon sans aucun contact métallique.
Ideal for medical and dental engineering: On request, we can equip your PULVERISETTE 13 premium line with a complete polymer interior coating together with grinding disks made of zirconium oxide – the perfect prerequisite for grinding without any contact of the sample with metal.
Please note: fixed and movable grinding disks made of zirconium oxide are additionally necessary:
fixed grinding disk, 200 mm diameter, zirconium oxide*: order no. 13.2100.27
movable grinding disk, 200 mm diameter, zirconium oxide*: order no. 13.2110.27
*Grinding parts made of zirconium oxide are only suitable for grinding ceramic materials, minerals, etc. and never for hard-tough samples, such as metals.
La combinaison du broyeur à disques PULVERISETTE 13 premium line avec le cyclone haute performance permet un nettoyage et un remplissage plus faciles, l'utilisation de cassettes de tamisage plus fines pour des finesses finales plus élevées, accélère le débit, et maintient la charge thermique des échantillons à un faible niveau - et ce même pour des matériaux qui sont autrement difficiles à broyer finement.
High-performance Cyclone separator made of stainless steel 304,
incl. sample glass 1 litre for the Disk Mill PULVERISETTE 13 premium line.
The FRITSCH high-performance Cyclone separator completely made of stainless steel 304 is particularly indispensable in the analytical sector and in the food and pharmaceutical industries, and for the processing of heterogeneous mixtures of material, e.g. in the cement industry. Due to its high surface quality, it offers enhanced resistance to corrosive media such as alkalis and acids and is especially easy to clean with a wide range of possible cleaning agents, without leaving any residues. The comminuted sample is drawn into a screwed-on collecting vessel or in a smaller sample glass, in which it can also be transported and stored. In addition, it can be completely dismantled, fully emptied, flooded and sterilised, and thus offers reliable protection against cross-contamination.
The advantages of the high-performance Cyclone separator at a glance
- Higher throughput - Improved discharge of material from the grinding chamber /less dead space
- Additional cooling of the grinding material and grinding parts
- Efficient size reduction of temperature-sensitive samples, electrostatically-charged plastics or powder coatings
- Ideal for light materials, small sample quantities and finer sieve sizes
- Highly efficient continuous comminution of large quantities
General specifications | |
Material | Stainless steel – 1.4301 |
ISO/EN/DIN code | X5CrNi1810 |
Chemical composition | |
Element | Share % |
Iron – Fe | 66.805 |
Carbon – C | 0.070 |
Silicon – Si | 1.000 |
Manganese – Mn | 2.000 |
Phosphorus – P | 0.045 |
Sulphur – S | 0.030 |
Chromium – Cr | 19.5 |
Nickel – Ni | 10.5 |
Nitrogen – N | 0.110 |
Physical and mechanical properties | |
Density | 7.8 g/cm³ |
Hardness | HRB 96 |
Sample glass 1 litre for sample exhaustion with the high-performance Cyclone separator.
The sample glass with 2 litres volume is recommended for sample exhaustion with the high-performance Cyclone separator for sample discharges larger than 1000 ml, since only a 1 litre sample glass is included in the delivery of the high-performance Cyclone separator.
The sample glass with 5 litres volume is recommended for sample exhaustion with the high-performance Cyclone separator for sample discharges larger than 1000 ml, since only a 1 litre sample glass is included in the delivery of the high-performance Cyclone separator.
The collection vessel 20 litres is recommended for sample exhaustion with the high-performance Cyclone separator for sample discharges larger than 1000 ml, since only a 1 litre sample glass is included in the delivery of the high-performance Cyclone separator.
General specifications | |
Material | Stainless steel – 1.4404/316L |
ISO/EN/DIN code | X2CrNiMo17-12-2 |
Chemical composition | |
Element | Share % |
Iron – Fe | approx. 62.8 |
Carbon – C | 0.03 |
Silicon – Si | 1 |
Manganese – Mn | 2 |
Phosphorus – P | 0.045 |
Sulphur – S | 0.015 |
Chromium – Cr | 18.5 |
Molybdenum – Mo | 2.50 |
Nickel – Ni | 13.00 |
Nitrogen – N | 0.110 |
Physical and mechanical properties | |
Density | 8.0 g/cm³ |
Hardness | 215 HB |
The exhaust system, dust category "M" according to DIN EN 60335-2-69 for 230 V/1~, 50/60 Hz, 1000 Watt is versatile:
For combination with the high performance and small volume cyclones.
To operate the FRITSCH Cyclones you need an exhaust system. The strong airflow ensures simple feeding, increases throughput, and reduces the thermal load of the samples. The high performance and small volume Cyclone separator can be combined with Universal-Cutting Mill PULVERISETTE 19, the Variable Speed Rotor Mill PULVERISETTE premium line and classic line even passive – without sample exhaust.
For cooling of the Variable Speed Rotor Mill PULVERISETTE 14 premium line
By connecting the exhaust system with the connecting piece order no. 14.4214.00, the cooling of the mill can easily be enhanced.
For combination with the Jaw Crusher PULVERISETTE 1 premium line
The exhaust system is simply connected and operated via a start and stop button on the instrument – perfect dust exhaust due to integrated dust exhaust channels for dust free operation.
For connecting to Disk Mill PULVERISETTE 13 premium line
The exhaust is simply connected to the PULVERISETTE 13 premium line and operated via a start and stop button on the instrument – for dust free comminution.
For connecting to the Jaw Crusher PULVERISETTE 1, Modell I + II classic line
Simply connect the exhaust system to the integrated connection of the PULVERISETTE 1. Fine dust arising during comminution is automatically removed. The exhaust system is also very useful when cleaning the grinding parts.
For connecting to the Disk Mill PULVERISETTE 13 classic line
Optionally, the exhaust system can be combined with the connecting piece order no. 13.1450.00, to the PULVERISETTE 13 classic line. Fine dust arising during comminution is automatically removed. The exhaust system is also very useful when cleaning the grinding parts.
1 pack = 5 pieces
One pack is included in the scope of delivery of the exhaust system (article No. 43.9070.00).
These fleece filter bags should be used for the vacuuming off of fine, dry materials.
For the vacuuming off of coarse, wet materials are plastic bags available (article no. 43.9052.00).
1 pack = 5 pieces
One pack is included in the order of the exhaust system (article No. 43.9070.00).
These plastic bags should be used for the vacuuming off of coarse, wet materials.
For the vacuuming off of fine, dry materials are paper filter bags available (article no. 43.9055.00).
Documentation IQ/OQ à remplir par l'utilisateur, aide à la qualification d'appareils dans le système de gestion de qualité, pour le broyeur à disques PULVERISETTE 13 premium line.
IQ/OQ documentation (questionnaire format - implementation by customer) for the independent utilization for the support of instrument qualification in the quality management system for the Disk Mill PULVERISETTE 13 premium line.