MODULES ANALYSETTE 22

 
 

AUTRES GRANULOMÈTRES

 
 

Module A-22

Module dispersion sèche

Référence
22.8600.00
Accessoires

Unité de mesure ANALYSETTE 22 NanoTec - Pour utiliser le module de dispersion par voie sèche FRITSCH, l'unité de mesure ANALYSETTE 22 NanoTec (référence 22.8000.00) est requise.
Informations détaillées concernant l'unité de mesure ANALYSETTE 22

En ce qui concerne la division représentative des échantillons - la base de toute analyse précise -nous recommandons d'utiliser le
diviseur d'échantillons à cône rotatif LABORETTE 27

Trémie à gravité

Kit de rééquipement permettant d'utiliser le module de dispersion par voie sèche comme trémie à gravité

Choisissez le kit de rééquipement

kit de rééquipement permettant d'utiliser le module de dispersion par voie sèche comme trémie à gravité

conversion kit to use the dry dispersion unit as a falling chute
N° 22.8035.00

For dry measurement without Dispersion.
For 100-120/200-240 V/1~, 50-60 Hz.
Cartridge with cpl. dry measuring cell incl. insertion block - for the use as a conversion kit - for insertion in the dry dispersion unit (article no. 22.8600.00).
For dry measurement of agglomerates of dry powder or for determining particle size distributions of free-flowing, coarse-grained materials without dispersion.
In this case, the sample is transported with an electronically controlled feeder directly above the intake funnel of the falling chute, from where it falls directly into the measuring cell and is measured by the laser beam without any dispersion at all.


Detailed information about the Falling Chute


Systèmes d'aspiration pour mesures avec le module de dispersion par voie sèche et trémie à gravité

L'aspiration du matériau de l'échantillon requiert un système d'aspiration extérieur.

Choisissez le système d'aspiration

Systèmes d'aspiration pour mesures avec le module de dispersion par voie sèche et trémie à gravité

dust exhaust system, dust category „M” according to DIN EN 60335-2-69
N° 43.9070.00
Exhaust system, dust category "M" according to DIN EN 60335-2-69

The exhaust system, dust category "M" according to DIN EN 60335-2-69 for 230 V/1~, 50/60 Hz, 1000 Watt is versatile:


For combination with the high performance and small volume cyclones.
To operate the FRITSCH Cyclones you need an exhaust system. The strong airflow ensures simple feeding, increases throughput, and reduces the thermal load of the samples. The high performance and small volume Cyclone separator can be combined with Universal-Cutting Mill PULVERISETTE 19, the Variable Speed Rotor Mill PULVERISETTE premium line and classic line even passive – without sample exhaust.


For cooling of the Variable Speed Rotor Mill PULVERISETTE 14 premium line
By connecting the exhaust system to the PULVERISETTE 14 premium line, the cooling of the mill can easily be enhanced.


For combination with the Jaw Crusher PULVERISETTE 1 premium line
The exhaust system is simply connected and operated via a start and stop button on the instrument – perfect dust exhaust due to integrated dust exhaust channels for dust free operation.


For connecting to Disk Mill PULVERISETTE 13 premium line
The exhaust system with the optional connecting piece for dust exhaust system order no. 13.3250.00, can be connected to the PULVERISETTE 13 premium line and operated via a start and stop button on the instrument – for dust free comminution.


For connecting to the Jaw Crusher PULVERISETTE 1, Modell I + II classic line
Simply connect the exhaust system to the integrated connection of the PULVERISETTE 1. Fine dust arising during comminution is automatically removed. The exhaust system is also very useful when cleaning the grinding parts.


For connecting to the Disk Mill PULVERISETTE 13 classic line
Optionally, the exhaust system can be combined with the connecting piece order no. 13.1450.00, to the PULVERISETTE 13 classic line. Fine dust arising during comminution is automatically removed. The exhaust system is also very useful when cleaning the grinding parts.


For vacuuming the sample material during dry measurements
The exhaust system is necessary to vacuum the sample material during measurements with the Dry Dispersion Unit and Falling Chute of the Laser Particle Sizer ANALYSETTE 22 NanoTec. Please keep in mind though, that this exhaust system does not contain a fine dust filter and therefore fine dust may escape. Please consider the valid occupational health and safety regulations. For dry measuring with the Laser Particle Sizer an exhaust system with fine dust filter is offered, please refer to order no. 43.9060.00.


Exhaust system with hose and ultra-fine filter, dust category "H" according to DIN EN 60335-2-69
N° 43.9060.00
Exhaust system with hose and ultra-fine filter, dust category "H" according to DIN EN 60335-2-69

For 230 V/1~, 50-60 Hz.
This exhaust system is equipped with a hose and ultra-fine filter of the dust category "H" according to DIN EN 60335-2-69, so the escape of fine dust is avoided. This exhaust system is especially recommended for the vacuuming of the sample during the dry measurement with the Laser Particle Sizer ANALYSETTE 22 NanoTec. 
Another exhaust system is offered; please refer to article no. 43.9070.00. Please note that this exhaust system is not equipped with a fine filter and therefore dust may escape. Please consider the valid occupational health and safety regulations. This exhaust system is mostly recommended for dust-free grinding and the vacuuming of during the process developing fine dust in the upper part of the grinding chamber and for the cleaning of the grinding parts. 


Pièces de rechange de système d'aspiration - poussière de classe « M » - 43.9070.00

fleece filter bag for exhaust system (pack = 5 pieces)
N° 43.9055.00

1 pack = 5 pieces
One pack is included in the scope of delivery of the exhaust system (article No. 43.9070.00).
These fleece filter bags should be used for the vacuuming off of fine, dry materials.
For the vacuuming off of coarse, wet materials are plastic bags available (article no. 43.9052.00).


plastic bag for exhaust system (pack = 5 pieces)
N° 43.9052.00

1 pack = 5 pieces

One pack is included in the order of the exhaust system (article No. 43.9070.00).
These plastic bags should be used for the vacuuming off of coarse, wet materials.
For the vacuuming off of fine, dry materials are paper filter bags available (article no. 43.9055.00).


Pièces de rechange de système d'aspiration - poussière de classe « H » - 43.9060.00

safety filter bag (pack = 3 pieces) for exhaust system 43.9060.00
N° 43.9065.00

1 Pack = 3 pieces 
One pack is included in the order of the exhaust system (article no. 43.9060.00)


ultra-fine filter for exhaust system 43.9060.00
N° 43.9066.00

1 piece is included in the order of the exhaust system (article no. 43.9060.00).


Matériaux de référence et certificats

Matériaux de référence destinés au contrôle du fonctionnement à intervalles réguliers de l'appareil de mesure granulométrique à laser ANALYSETTE 22 NanoTec. Les matériaux de référence proposés par FRITSCH sont livrés avec des instructions précises de dispersion et de mesure, et accompagnés d'un certificat qui mentionne la limite supérieure et la limite inférieure de granulométrie devant résulter de la mesure. Ces valeurs limite ont été déterminées avec une méthode internationalement reconnue (NIST-traceable).

CHOISISSEZ LE MATÉRIAU DE RÉFÉRENCE

Matériaux de référence certifiés (NIST-traceable) pour vérification (Performance Verification) selon ISO 13320

test powder for dry dispersion, 50 - 350 µm
N° 85.2230.00
Test powder for dry dispersion, 50 - 350 <span class="to-lower">µm</span>

Test powder for dry dispersion, 50 - 350 µm (box with 10 single-shots 5 g) certified reference material for performance verification of the FRITSCH Laser Particle Sizer ANALYSETTE 22 NanoTec, which is used for dry dispersion and for calibration according to ISO 13320 in regard to repeatability and reproducibility.
The test powder for dry dispersion is delivered in a box with 10 single-shots 5 g.
Also a test powder for wet dispersion, as well as test suspensions for the inspection of the measurement precision are offered.


Matériaux de référence FRITSCH selon ISO 13320

FRITSCH-test powder F-500, 0.5 - 50 µm, for wet and dry dispersion
N° 85.2100.00
FRITSCH-test powder F-500, 0.5 - 50 <span class="to-lower">µm</span>, for wet and dry dispersion

For calibration of the Laser Particle Sizer ANALYSETTE 22 NanoTec for wet and dry dispersion within the framework of a test equipment monitoring system as per ISO 13320.
The cost-efficient alternative (non-certified reference materials) for regular inspection of your Laser Particle Sizer ANALYSETTE 22.
The FRITSCH-test powder F-500, 0.5 - 50 µm is delivered in a handy 50 g bottle.


FRITSCH-test powder F-70, 10 - 600 µm, for dry dispersion
N° 85.2110.00
FRITSCH-test powder F-70, 10 - 600 <span class="to-lower">µm</span>, for dry dispersion

For calibration of the Laser Particle Sizer ANALYSETTE 22 NanoTec for dry dispersion within the framework of a test equipment monitoring system as per ISO 13320.
The cost-efficient alternative (non-certified reference materials) for regular inspection of your Laser Particle Sizer ANALYSETTE 22.
The FRITSCH-test powder F-70, 100 - 600 µm is delivered in a handy 150 g bottle.


Certification

set of IQ/OQ blank forms
N° 96.1000.00
Set of IQ/OQ blank forms

Set of IQ/OQ blank forms, (questionnaire format – standards and implementation not included).
For the support of the initial operation resp. examination of the function of the FRITSCH Laser Particle Sizer according to ISO 13320, FRITSCH offers appropriate questionnaires as blank forms. Certificates for tests according to ISO 13320 available on request:


Certificates for tests according to ISO 13320 for ANALYSETTE 22 NanoTec
We offer the Performance Verification for the wet and dry dispersion. The verification must be carried out directly on the instrument either here in Idar-Oberstein or at your site. Therefore, we would like to provide you with an individual offer – according to your needs.
Performance Verification for wet dispersion – Order No. 96.0080.00
Performance Verification for dry dispersion – Order No. 96.0081.00


Just contact:
Mr. Stefan Fröhlich,
phone: 0049 67 84 70 150
froehlich@fritsch.de


Pièces de rechange pour le module de dispersion par voie sèche

Pièces de rechange pour le module de dispersion par voie sèche, cassette, cellule de mesure à sec, verres de cellule de mesure.

Choisissez une pièce de rechange

Pièces de rechange pour le module de dispersion par voie sèche

cartridge with cpl. dry measuring cell
N° 22.8010.00
Cartridge with cpl. dry measuring cell for dry dispersion unit

Cartridge with cpl. dry measuring cell incl. insertion block for insertion into the dry dispersion unit (article no. 22.8600.00).



conversion kit to use the dry dispersion unit as a falling chute
N° 22.8035.00

For dry measurement without Dispersion.
For 100-120/200-240 V/1~, 50-60 Hz.
Cartridge with cpl. dry measuring cell incl. insertion block - for the use as a conversion kit - for insertion in the dry dispersion unit (article no. 22.8600.00).
For dry measurement of agglomerates of dry powder or for determining particle size distributions of free-flowing, coarse-grained materials without dispersion.
In this case, the sample is transported with an electronically controlled feeder directly above the intake funnel of the falling chute, from where it falls directly into the measuring cell and is measured by the laser beam without any dispersion at all.


Detailed information about the Falling Chute


measuring cell glass cpl. 2 mm for dry measuring cell
N° 22.8013.00
measuring cell glass cpl. 2 mm for dry measuring cell

Measuring cell glass cpl. 2 mm for dry measuring cell, for the dry dispersion unit (article no. 22.8600.00) and falling chute (article no. 22.8900.00).


measuring cell glass cpl. 11 mm for dry measuring cell
N° 22.8016.00
measuring cell glass cpl. 11 mm for dry measuring cell

Measuring cell glass cpl. 11 mm for dry measuring cell, for the dry dispersion unit (article no. 22.8600.00) and falling chute (article no. 22.8900.00).


Référence
22.8600.00
Sales Consultant Particle Sizing
M.Sc. (Phys.) Maik Paluga
FRITSCH GmbH - Milling and Sizing
Industriestrasse 8
55743 Idar-Oberstein
Téléphone +49 67 84 70 188
Portable +49 151 40 48 38 41
Janine Allkofer
FRITSCH GmbH - Milling and Sizing
Industriestrasse 8
55743 Idar-Oberstein
Téléphone +49 67 84 70 0

Base de données de protocoles de mesure

EFFECTUEZ UN TEST

ANALYSE DE PARTICULES GRATUITE

Faites-nous parvenir un échantillon, nous le soumettrons à une analyse de particules - nous vous enverrons un compte rendu individuel d'analyse.