AUTRES GROUPES DE PRODUITS
Concasseur à mâchoires - Modèle II
PULVERISETTE 1
classic lineVeuillez tenir compte des points suivants : Les plaques de broyage et les parois du concasseur à mâchoires FRITSCH PULVERISETTE 1 classic line sont disponibles en 6 matériaux différents pour parer aux risques de contamination indésirable induits par l'abrasion du matériau. Le concasseur est équipé en standard de mâchoires de broyage fixe et mobile en acier trempé, matériau constituant aussi les parois latérales.
Sur demande, nous équipons votre PULVERISETTE 1 classic line, modèle II, de plaques de broyage fixe et mobile en acier, à surface nervurée, qui influencent la forme des particules et la distribution granulométrique du broyat.
En règle générale, les plaques de broyage et les parois latérales sont d'un même matériau. Les parois latérales n'étant cependant pas soumises à des efforts intenses, celles standards en acier trempé peuvent souvent être conservées.
PLAQUES DE BROYAGE FIXES ET MOBILES ET PAROIS LATÉRALES
-
Données matériau des plaques de broyage et des parois
Matériau Composant principal du matériau Densité en g/cm³ Résistance à l'abrasion Type d'échantillon acier trempé Fe – Cr 7,9 bonne échantillons durs, cassants acier inoxydable Fe – Cr - Ni 8 relativement bonne échantillons mi-durs, cassants acier à outil sans chrome Fe 7,8 bonne échantillons mi-durs, fragmentation d'échantillons RoHS acier au manganèse Fe - Mn 7,9-8 bonne échantillons durs, cassants métal dur carbure de tungstène WC 14,05 très bonne échantillons très durs, abrasifs oxyde de zirconium ZrO2 5,7 bonne échantillons mi-durs, cassants broyage sans métaux aluminium Al 2,7 relativement bonne échantillons cassants
En règle générale, les plaques de broyage et les parois latérales sont d'un même matériau.
Pour le broyage d'échantillons RoHS (pour analyse XRF par exemple), les plaques de broyage et les parois en acier à outil sans chrome sont particulièrement indiquées.
Pour un pré-broyage d'échantillons mi-durs et cassants garanti sans métaux (pour les applications de l'industrie céramique par exemple), nous pouvons équiper le PULVERISETTE 1 classic line de plaques de broyage en oxyde de zirconium, de parois latérales en oxyde de zirconium ou en aluminium et d'une trémie spéciale en PVC. Toute contamination métallique (de céramique dentaire, par exemple) est ainsi évitée à coup sûr.
PLAQUES DE BROYAGE FIXES ET MOBILES
for the comminution of brittle, very hard samples
General material specification:
Material: hardened steel - 1.2436
Abrasion resistance: good
suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis.
Crushing jaws made of hardened steel belong to the standard equipment of the FRITSCH Jaw Crushers and therefore they are included in the instrument price.
| General specifications | |
| Material | Hardened steel - 1.2379 |
| ISO/EN/DIN code | X153CrMoV12 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 83.4 |
| Carbon – C | 1.55 – 2.10 |
| Molybdenum – M | ≤ 0.8 |
| Vanadium– V | ≤ 0.9 |
| Chromium – Cr | 12 |
| Tungsten– W | ≤ 0.8 |
| Physical and mechanical properties | |
| Density | 7.7 g/cm³ |
| Hardness | 60 + 3 HRC |
Explanations on hardness data
for the comminution of brittle, hard samples
General material specification:
Material: hardened steel - 1.2436
Abrasion resistance: good
suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis.
Crushing jaws made of hardened steel belong to the standard equipment of the FRITSCH Jaw Crushers and therefore they are included in the instrument price.
| General specifications | |
| Material | Hardened steel - 1.2379 |
| ISO/EN/DIN code | X153CrMoV12 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 83.4 |
| Carbon – C | 1.55 – 2.10 |
| Molybdenum – M | ≤ 0.8 |
| Vanadium– V | ≤ 0.9 |
| Chromium – Cr | 12 |
| Tungsten– W | ≤ 0.8 |
| Physical and mechanical properties | |
| Density | 7.7 g/cm³ |
| Hardness | 60 + 3 HRC |
Explanations on hardness data
for the comminution of medium-hard, brittle samples
General material specification:
Material: stainless steel - 1.4571
Abrasion resistance: fairly good
Suitable for: medium-hard, brittle samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Stainless steel – 1.4571 |
| ISO/EN/DIN code | X6CrNIMo Ti17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 63 |
| Carbon – C | max. 0.08 |
| Silicon – Si | max. 1.0 |
| Manganese – Mn | max. 2.0 |
| Phosphorus – P | max. 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 16.5 – 18.5 |
| Molybdenum – Mo | 2.00 – 2.50 |
| Nickel – Ni | 10.5 – 13.5 |
| Titan – Ti | 5 x C≤ 0.70 |
| Physical and mechanical properties | |
| Density | 8 g/cm³ |
| Hardness | 95 HB |
Explanations on hardness data
for the comminution of medium-hard, brittle samples
General material specification:
Material: stainless steel - 1.4571
Abrasion resistance: fairly good
Suitable for: medium-hard, brittle samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Stainless steel – 1.4571 |
| ISO/EN/DIN code | X6CrNIMo Ti17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 63 |
| Carbon – C | max. 0.08 |
| Silicon – Si | max. 1.0 |
| Manganese – Mn | max. 2.0 |
| Phosphorus – P | max. 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 16.5 – 18.5 |
| Molybdenum – Mo | 2.00 – 2.50 |
| Nickel – Ni | 10.5 – 13.5 |
| Titan – Ti | 5 x C≤ 0.70 |
| Physical and mechanical properties | |
| Density | 8 g/cm³ |
| Hardness | 95 HB |
Explanations on hardness data
for the comminution of medium-hard samples
General material specifications:
Material: chromium-free tool steel – 1.1740
Abrasion resistance: good
Suitable for: medium-hard samples
Detailed information about the material you will find in the element analysis.
For the comminution of RoHS samples – such as for the XRF analysis – crushing jaws and support walls made of chromium-free tool steel are particularly well suited.
| General specifications | |
| Material | Chromium-free tool steel – 1.1740 |
| ISO/EN/DIN code | C60W |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 98.63 – 98.08 |
| Carbon – C | 0.55 – 0.65 |
| Silicon – Si | 0.15 – 0.4 |
| Manganese – Mn | 0.6 – 0.8 |
| Phosphorus – P | 0.035 |
| Sulphur – S | 0.035 |
| Physical and mechanical properties | |
| Density | 7.8 g/cm³ |
| Hardness | 52 - 58 HRC |
Explanations on hardness data
for the comminution of medium-hard samples
General material specifications:
Material: chromium-free tool steel – 1.1740
Abrasion resistance: good
Suitable for: medium-hard samples
Detailed information about the material you will find in the element analysis.
For the comminution of RoHS samples – such as for the XRF analysis – crushing jaws and support walls made of chromium-free tool steel are particularly well suited.
| General specifications | |
| Material | Chromium-free tool steel – 1.1740 |
| ISO/EN/DIN code | C60W |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 98.63 – 98.08 |
| Carbon – C | 0.55 – 0.65 |
| Silicon – Si | 0.15 – 0.4 |
| Manganese – Mn | 0.6 – 0.8 |
| Phosphorus – P | 0.035 |
| Sulphur – S | 0.035 |
| Physical and mechanical properties | |
| Density | 7.8 g/cm³ |
| Hardness | 52 - 58 HRC |
Explanations on hardness data
for the comminution of hard, brittle samples
General material specifications:
Material: manganese steel - 1.3401
Abrasion resistance: good
Suitable for: hard, brittle samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Manganese steel – 1.3401 |
| ISO/EN/DIN code | X120Mn12 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 83.56 -85.96 |
| Chromium – Cr | < 1,50 |
| Silicon – Si | 0,3–0,5 |
| Manganese – Mn | 12,0–13.0 |
| Carbon – C | 1.1 -1.3 |
| Phosphorus – P | < 0.1 |
| Sulphur – S | < 0.04 |
| Physical and mechanical properties | |
| Density | 7.9–8 g/cm³ |
| Hardness | 27–32 HRC |
Explanations on hardness data
for the comminution of hard, brittle samples
General material specifications:
Material: manganese steel - 1.3401
Abrasion resistance: good
Suitable for: hard, brittle samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Manganese steel – 1.3401 |
| ISO/EN/DIN code | X120Mn12 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 83.56 -85.96 |
| Chromium – Cr | < 1,50 |
| Silicon – Si | 0,3–0,5 |
| Manganese – Mn | 12,0–13.0 |
| Carbon – C | 1.1 -1.3 |
| Phosphorus – P | < 0.1 |
| Sulphur – S | < 0.04 |
| Physical and mechanical properties | |
| Density | 7.9–8 g/cm³ |
| Hardness | 27–32 HRC |
Explanations on hardness data
for the comminution of hard, abrasive samples
General material specifications:
Material: Hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: very hard, abrasive samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Tungsten carbide - WC |
| ISO/EN/DIN code | |
| Chemical composition | |
| Element | Share % |
| Tungsten carbide – TC | 85.00 |
| Cobalt – Co | 15.00 |
| Physical and mechanical properties | |
| Density | 14.05 g/cm³ |
| Hardness | 1020 HV10 |
Explanations on hardness data
for the comminution of very hard, abrasive samples
General material specifications:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for very hard, abrasive samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Tungsten carbide - WC |
| ISO/EN/DIN code | |
| Chemical composition | |
| Element | Share % |
| Tungsten carbide – TC | 85.00 |
| Cobalt – Co | 15.00 |
| Physical and mechanical properties | |
| Density | 14.05 g/cm³ |
| Hardness | 1020 HV10 |
Explanations on hardness data
for the comminution of medium-hard, brittle samples and metal-free crushing
General material specifications:
Material: zirconium oxide - ZrO2
Abrasion resistance: good
Suitable for: medium-hard, brittle samples, metal-free crushing
Detailed information about the material you will find in the element analysis.
Metal-free pre-crushing
For absolute protection against metal contamination, such as for dental ceramics. Crushing jaws made of zirconium oxide are perfect for completely metal-free pre-crushing of medium-hard brittle samples, for example in the ceramics industry, we can equip your FRITSCH Jaw Crusher PULVERISETTE 1 premium line and classic line with lateral support walls made of:
aluminium:
order no. 43.4040.13 – model premium line
order no. 43.3150.13 – model classic line
zirconium oxide:
order no. 43.4050.27 – model premium line
order no. 43.3160.27 – model classic line
polyamide:
order no. 43.4045.16 – model premium line
| General specifications | |
| Material | Zirconium oxide - ZrO2 |
| Chemical composition | |
| Element | Share % |
| Zirconium oxide – ZrO2 | 94.2 - 95.2 |
| Hafnium oxide – HfO2 | 1 - 2 |
| Magnesium oxide – MgO | 3.5 |
| Silicon dioxide – SiO | 0.1 |
| Aluminium oxide – Al2O3 | 0.1 |
| Other | 0.1 |
| Physical and mechanical properties | |
| Density | 5.7 g/cm³ |
| Hardness Vickers | 1200 (HV10) |
Explanations on hardness data
for the comminution of medium-hard, brittle samples and metal-free grinding
General material specification:
Material: zirconium oxide - ZrO2
Abrasion resistance: good
Suitable for: abrasive, medium-hard, brittle samples, metal-free crushing
Detailed information about the material you will find in the element analysis.
Metal-free pre-crushing
For absolute protection against metal contamination, such as for dental ceramics. Crushing jaws made of zirconium oxide are perfect for completely metal-free pre-crushing of medium-hard brittle samples, for example in the ceramics industry, we can equip your FRITSCH Jaw Crusher PULVERISETTE 1 premium line and classic line with lateral support walls made of:
aluminium:
order no. 43.4040.13 – model premium line
order no. 43.3150.13 – model classic line
zirconium oxide:
order no. 43.4050.27 – model premium line
order no. 43.3160.27 – model classic line
polyamide:
order no. 43.4045.16 – model premium line
| General specifications | |
| Material | Zirconium oxide - ZrO2 |
| Chemical composition | |
| Element | Share % |
| Zirconium oxide – ZrO2 | 94.2 - 95.2 |
| Hafnium oxide – HfO2 | 1 - 2 |
| Magnesium oxide – MgO | 3.5 |
| Silicon dioxide – SiO | 0.1 |
| Aluminium oxide – Al2O3 | 0.1 |
| Other | 0.1 |
| Physical and mechanical properties | |
| Density | 5.7 g/cm³ |
| Hardness Vickers | 1200 (HV10) |
Explanations on hardness data
PAROIS LATÉRALES
Lateral support walls made of hardened tool steel belong to the standard equipment of the FRITSCH Jaw Crushers and therefore they are included in the instrument price.
General material specifications:
Material: hardened steel - 1.2436
Abrasion resistance: good
Suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Hardened steel - 1.2379 |
| ISO/EN/DIN code | X153CrMoV12 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 83.4 |
| Carbon – C | 1.55 – 2.10 |
| Molybdenum – M | ≤ 0.8 |
| Vanadium– V | ≤ 0.9 |
| Chromium – Cr | 12 |
| Tungsten– W | ≤ 0.8 |
| Physical and mechanical properties | |
| Density | 7.7 g/cm³ |
| Hardness | 60 + 3 HRC |
Explanations on hardness data
General material specification:
Material: stainless steel - 1.4571
Abrasion resistance: fairly good
Suitable for: medium-hard, brittle samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Stainless steel – 1.4571 |
| ISO/EN/DIN code | X6CrNIMo Ti17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 63 |
| Carbon – C | max. 0.08 |
| Silicon – Si | max. 1.0 |
| Manganese – Mn | max. 2.0 |
| Phosphorus – P | max. 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 16.5 – 18.5 |
| Molybdenum – Mo | 2.00 – 2.50 |
| Nickel – Ni | 10.5 – 13.5 |
| Titan – Ti | 5 x C≤ 0.70 |
| Physical and mechanical properties | |
| Density | 8 g/cm³ |
| Hardness | 95 HB |
Explanations on hardness data
General material specifications:
Material: chromium-free tool steel - 1.1740
Abrasion resistance: good
Suitable for: medium-hard samples
Detailed information about the material you will find in the element analysis.
For the comminution of RoHS samples – such as for the XRF analysis – crushing jaws and support walls made of chromium-free tool steel are particularly well suited.
| General specifications | |
| Material | Chromium-free tool steel – 1.1740 |
| ISO/EN/DIN code | C60W |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 98.63 – 98.08 |
| Carbon – C | 0.55 – 0.65 |
| Silicon – Si | 0.15 – 0.4 |
| Manganese – Mn | 0.6 – 0.8 |
| Phosphorus – P | 0.035 |
| Sulphur – S | 0.035 |
| Physical and mechanical properties | |
| Density | 7.8 g/cm³ |
| Hardness | 52 - 58 HRC |
Explanations on hardness data
General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: very hard, abrasive samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Tungsten carbide - WC |
| ISO/EN/DIN code | |
| Chemical composition | |
| Element | Share % |
| Tungsten carbide – TC | 85.00 |
| Cobalt – Co | 15.00 |
| Physical and mechanical properties | |
| Density | 14.05 g/cm³ |
| Hardness | 1020 HV10 |
Explanations on hardness data
General material specifications:
Material: aluminium - 3.4365
Abrasion resistance: fairly good
Suitable for: medium-hard, brittle samples
Detailed information about the material you will find in the element analysis.
Metal-free pre-crushing
Crushing jaws made of zirconium oxide are perfect for completely metal-free pre-crushing of medium-hard brittle samples, for example in the ceramics industry, we can equip your FRITSCH Jaw Crusher PULVERISETTE 1 classic line with fixed crushing jaws (order no. 43.3100.27) or movable crushing jaws (order no. 43.3110.27) in zirconium oxide and with a special PVC funnel (order no. 01.7410.00). For absolute protection against metal contamination, such as for dental ceramics.
| General specifications | |
| Material | Aluminium AlZnMgCu1,5 |
| ISO/EN/DIN Code | 3.4365 |
| Chemical composition | |
| Element | Share % | Iron – Fe | 0.50 |
| Silicon – Si | 0.40 |
| Copper – Cu | 1.20 - 2.0 |
| Manganese – Mn | 0.30 |
| Magnesium – Mg | 2.1 - 2.9 |
| Chromium – Cr | 0.18 - 0.28 |
| Zinc – ZN | 5.1 - 6.1 |
| Titan – Ti | 0.20 |
| Physical and mechanical properties | |
| Density | 2,7 g/cm³ |
| Hardness | 2,75 Mohs |
Explanations on hardness data
General material specification:
Material: zirconium oxide - ZrO2
Abrasion resistance: good
Suitable for: medium-hard, brittle samples, metal-free crushing
Detailed information about the material you will find in the element analysis.
Metal-free pre-crushing
Crushing jaws made of zirconium oxide are perfect for completely metal-free pre-crushing of medium-hard brittle samples, for example in the ceramics industry, we can equip your FRITSCH Jaw Crusher PULVERISETTE 1 classic line with fixed crushing jaws (order no. 43.3100.27) or movable crushing jaws (order no. 43.3110.27) in zirconium oxide or aluminium lateral suport walls (order no. 43.3150.13), and with a special PVC funnel (order no. 01.5410.00). For absolute protection against metal contamination, such as for dental ceramics.
Lateral support walls of zirconium oxide are only suitable for crushing ceramic materials, minerals etc. and never for hard-tough samples such as metals.
| General specifications | |
| Material | Zirconium oxide - ZrO2 |
| Chemical composition | |
| Element | Share % |
| Zirconium oxide – ZrO2 | 94.2 - 95.2 |
| Hafnium oxide – HfO2 | 1 - 2 |
| Magnesium oxide – MgO | 3.5 |
| Silicon dioxide – SiO | 0.1 |
| Aluminium oxide – Al2O3 | 0.1 |
| Other | 0.1 |
| Physical and mechanical properties | |
| Density | 5.7 g/cm³ |
| Hardness Vickers | 1200 (HV10) |
Explanations on hardness data
ACCESSOIRES DE PRÉ-BROYAGE SANS MÉTAL
Pour pré-broyer des échantillons cassants sans métal, utilisez la goulotte en PVC (bagues de serrage comprises). Toute contamination métallique est ainsi évitée à coup sûr, par exemple dans l'industrie céramique (céramique dentaire).
TRÉMIE EN PVC AVEC BARRES DE SERRAGE
Use the PVC funnel and the included clamping strips for metal-free pre-crushing of brittle samples. So you will have absolute protection against metal contamination for example for example in the ceramics industry – dental ceramics.
For this you will need additionally fixed and movable crushing jaws made of zirconium oxide* and lateral support walls made of zirconium oxide*.
fixed crushing jaw
zirconium oxide*- order no. - 43.3100.27
movable crushing jaw
zirconium oxide* - order no. - 43.3110.27
lateral support walls
zirconium oxide*- order no. - 43.3160.27
*Please note: Crushing jaws and lateral support walls made of zirconium oxide* are only suitable for crushing ceramic materials, minerals etc. and never for hard-tough samples such as metals.
SYSTÈME D'ASPIRATION
Un raccord intégré facilite considérablement la combinaison avec un système d'aspiration lorsqu'il s'agit d'éliminer automatiquement les poussières fines inhérentes au broyage. Ce dispositif d'aspiration de poussière représente également une aide précieuse lors du nettoyage des pièces de broyage.
SYSTÈME D'ASPIRATION ET ACCESSOIRES
The exhaust system, dust category "M" according to DIN EN 60335-2-69 for 230 V/1~, 50/60 Hz, 1600 Watt is versatile:
For combination with the high performance and small volume cyclones.
To operate the FRITSCH Cyclones you need an exhaust system. The strong airflow ensures simple feeding, increases throughput, and reduces the thermal load of the samples. The high performance and small volume Cyclone separator can be combined with Universal Cutting Mills PULVERISETTE 19, the Variable Speed Rotor Mill PULVERISETTE 14 premium line and classic line. The small volume cyclone can also be combined with the Variable Speed Rotor Mill PULVERISETE 14 premium line and classic line even for passive utilisation – without sample exhaust.
The high-performance cyclone is ideal for combination with the Universal Cutting Mills PULVERISETTE 19 large, the Cross Beater Mill PULVERISETTE 16 and the Disk Mill PULVERISETTE 13 premium line for optimal sample extraction and for comminution of larger quantities.
For cooling of the Variable Speed Rotor Mill PULVERISETTE 14 premium line
By connecting the exhaust system with the connecting piece order no. 14.4214.00, the cooling of the mill can easily be enhanced.
For connecting to Disk Mill PULVERISETTE 13 premium line
The exhaust is simply connected to the PULVERISETTE 13 premium line and operated via a start and stop button on the instrument – for dust free comminution.
For connecting to the Jaw Crusher PULVERISETTE 1, Modell I + II classic line
Simply connect the exhaust system to the integrated connection of the PULVERISETTE 1. Fine dust arising during comminution is automatically removed. The exhaust system is also very useful when cleaning the grinding parts.
For connecting to the Disk Mill PULVERISETTE 13 classic line
The exhaust system can be easily connected to the PULVERISETTE 13 classic line. Fine dust arising during comminution is automatically removed. The exhaust system is also very useful when cleaning the grinding parts.
For exhaustion of the sample during dry measurement with the Laser Particle Sizers ANALYSETTE 22 NeXT
An exhaust system is necessary to ensure automatic sample exhaustion during dry measurement. When the measurement is completed it can also be easily used to manually clean the feeder.
Please note that the exhaust system article no. 43.9070.00, is not equipped with a fine filter and therefore dust may escape. Please consider the valid occupational health and safety regulations. This exhaust system is mostly recommended for dust-free grinding and the vacuuming of during the process developing fine dust in the upper part of the grinding chamber and for the cleaning of the grinding parts.
For vacuuming of the sample during dry measurement with the Laser Particle Sizers ANALYSETTE 22 NeXT, we recommended we recommend the exhaust system article no. 43.9060.00, which is equipped with a hose and an ultra-fine filter of dust class "H" according to DIN EN 60335-2-69, so that the escape of fine dust is reduced.
1 pack = 5 pieces
One pack is included in the scope of delivery of the exhaust system (article No. 43.9070.00).
These fleece filter bags should be used for the vacuuming off of fine, dry materials.
For the vacuuming off of coarse, wet materials are plastic bags available (article no. 43.9052.00).
1 pack = 5 pieces
One pack is included in the order of the exhaust system (article No. 43.9070.00).
These plastic bags should be used for the vacuuming off of coarse, wet materials.
For the vacuuming off of fine, dry materials are paper filter bags available (article no. 43.9055.00).
Accessoires pour la combinaison du concasseur à mâchoires et du broyeur à disques
Châssis de montage pour l'utilisation combinée du concasseur à mâchoires PULVERISETTE 1 classic line et du broyeur à disque PULVERISETTE 13 classic line.
accessoires pour la combinaison
For fine pre-crushing of sample material with a feed size of up to 95 mm down to 0.1 mm final fineness in a single process and for continuous operation with the Jaw Crushers PULVERISETTE 1 classic line.
Fine pre-crushing from up to 95 mm down to 01 mm in a single process
A mounting rack with chute in combination with the Jaw Crusher PULVERISETTE 1 classic line (Model I + II) and the Disk Mill PULVERISETTE 13 classic line make it possible to grind up to 95 mm feed material down to a final fineness of 100 µm in a single process.
Continuous operation
With the use of the mounting rack and delivery chute, the Jaw Crusher PULVERISETTE 1 classic line (Model I + II) can be used for continuous operation. Conversion kit for the continuous operation of the Disk Mill PULVERISETTE 13 classic line on request.
Select the appropriate grinding parts and the desired configuration from the options available from our accessory pages for the:
Jaw Crusher PULVERISETTE 1, Model I classic line
Jaw Crusher PULVERISETTE 1, Model II classic line
Disk Mill PULVERISETTE 13 classic line
CERTIFICATION
Documentation IQ/OQ (formulaire - exécution non comprise dans le prix) à remplir par l'utilisateur, destinée à aider à la qualification du matériel dans le service de gestion de qualité, pour les concasseurs à mâchoires PULVERISETTE 1 classic line, modèles l et ll.
CERTIFICATION
IQ/OQ documentation (questionnaire format - implementation by customer) for the independent utilization for the support of instrument qualification in the quality management system for the Jaw Crushers PULVERISETTE 1 classic line, model I and II.
