MA DEMANDE () 
Accueil/Préparation d'échantillons/Tamisage /ANALYSETTE 18 / Accessoires

AUTRES GROUPES DE PRODUITS

 
 

Tamiseuse à haute performance

ANALYSETTE 18

Référence
18.3020.00
Détails du produit
Description CARACTÉRISTIQUES TECHNIQUES
Accessoires
Téléchargements Comparaison de produits
Accessoires

La tamiseuse à haute performance ANALYSETTE 18 est livrée en version standard avec le dispositif de verrouillage,  le couvercle de tamisage permettant un tamisage à sec et le logiciel AUTOSIEVE (90 jours d'essai gratuit).

Veuillez tenir compte des points suivants : Cette tamiseuse d'analyse doit être complétée de tamis d'analyse et d'un fond récepteur.

Accessoires des tamis d'analyse Ø 400 mm

Nous vous proposons les accessoires parfaitement adaptés à votre application de tamisage, qu'il 'agisse de fond récepteur, de fond récepteur intermédiaire, de kit de transformation en tamisage par voie humide ou de joint de rechange.

Choisissez les accessoires des tamis d'analyse de Ø 400 mm

Accessoires des tamis d'analyse Ø 400 mm

sieve pan made of stainless steel 400 mm dia.
N° 37.1000.01
Sieve pan made of stainless steel 400 mm dia.

For dry sieving with test sieves 400 mm diameter.

The sieve pan made of stainless steel completes the sieve stack.


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
interposed sieve pan made of stainless steel 400 mm dia.
N° 37.1100.01
Interposed sieve pan made of stainless steel 400 mm dia.

For dry sieving with test sieves 400 mm diameter.


If several sieving operations should be carried out simultaneously, an interposed sieve pan must be used as sieve pan between the sieves.


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
conversion kit for wet sieving
N° 18.3048.00
conversion kit for wet sieving

Consisting of clamping lid with wide spreading spray diffuser, sieve pan with outlet made of stainless steel 400 mm dia. and PVC-hose.


Venting ring for test sieves 400 mm dia.
N° 31.1350.02
Venting ring for test sieves

Venting ring for test sieves 400 mm dia. - required when utilizing test sieves < 100 µm. Venting rings are used to prevent the occurrence of air cushions during wet sieving.


replacement seal ring NBR for test sieves 400 mm dia.
N° 37.0010.16
Replacement seal ring NBR

replacement seal ring NBR for test sieves 400 mm dia.


Accessoires des tamis d'analyse Ø 200 mm

Un adaptateur est disponible pour utiliser des tamis de diamètre 200mm et 8’’. 

Choisissez les accessoires des tamis d'analyse de

Accessories for test sieves 200 mm dia.

adapter polyamide
N° 18.3051.00

adapter polyamide for clamping lid for dry sieving with test sieves 200 mm/8" dia.


Accessoires d'analyse automatique de tamisage

Le logiciel multilingue AUTOSIEVE assure la commande de l' ANALYSETTE 18 et l'analyse automatique, la surveillance facile et la documentation des résultats du tamisage.

Choisissez les accessoires d'analyse automatique du tamisage

Accessoires d'analyse automatique de tamisage

Software AUTOSIEVE-activation
N° 03.2902.00
Software AUTOSIEVE for Windows for control and automatic evaluation of sieve analysis (price for software activation)

Software AUTOSIEVE-activation for installation on up to 3 Windows PC's after expiration of the free of charge test phase for FRITSCH software AUTOSIEVE for Windows.


System requirements - Software AUTOSIEVE
Minimum software requirements: Windows 7 or higher
Minimum hardware requirements: standard WINDOWS ™ PC with at least 2 Gbyte RAM


Your advantages with AUTOSIEVE:

  • Automatic evaluation of your sieve Analysis
  • Simple monitoring and documentation of your sieving results
  • Suitable for all FRITSCH Sieve Shakers: Vibratory Sieve Shakers ANALYSETTE 3 PRO and ANALYSETTE 3 SPARTAN and the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18
  • After conducting your sieving– simply connect the laboratory analysis balance, then weigh the sieves before and after sieving using differential weighing – AUTOSIEVE will do the rest
  • Extensive presentation of the results: presentation and printout as cumulative or frequency distribution and as graphs according to DIN ISO 9276-1
  • Controlling of the Vibratory Sieve Shaker ANALYSETTE 3 PRO and entry of all functions such as amplitude, sieving time, interval operation and the type of sieving comfortable via the computer
  • Monitoring of the sieving via the online-comparison of the set and actual amplitude and therefore an auto validation of the sieving process with the Vibratory Sieve Shaker ANALYSETTE 3 PRO

FRITSCH offers for the differential weighing of the sieves a special laboratory analysis balance for the Vibratory Sieve Shakers ANALYSETTE 3 PRO and SPARTAN, which you can order with the following order no. 03.2600.00.
A laboratory analysis balance for the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18 is available on request.


Auxiliaire de tamisage et concentré de nettoyage pour les tamis

Pour tamiser des matériaux ou des agglomérats fins, il est avantageux d'utiliser par exemple des dés en vulkollan. Nous proposons également un concentré de nettoyage pour les tamis.

Choisissez l'auxiliaire de tamisage

Auxiliaire de tamisage

1 vulkollan cube (10 cubes per sieve)
N° 37.0200.16
Vulkollan cube

1 vulkollan cube.


For sieving of fine-grained materials or agglomerates, the use of these vulkollan cubes is recommended.


Recommended quantity per sieve: minimum 10 cubes per sieve.


Concentré de nettoyage pour tamis

concentrated cleaning liquid, can of 2.5 litres
N° 17.0400.00
Concentrated cleaning liquid, can of 2.5 litres

Can of 2.5 litres concentrated cleaning liquid, alkaline, for dilution 1:33.


Ideal for gentle and effective cleaning of your test and micro-precision sieves. With reliable protection
against corrosion of stainless steel, nickel and bronze.


ANALYSE DE RÉFÉRENCE
General specifications
Chemical formulaCombination of tensides, glycols and environmentally friendly complexing agents
RegulationsNot subject to labelling requirements according to the EC-Guidelines for Hazardous Materials Ordinance
Density~ 1.01 g/cm3
PH value> 11 (undiluted)
Toxicological informationnon-irritant for skin, eyes etc.
First aidrefer to enclosed label
Environmental informationdo not discard into groundwater, canalisation or bodies of water
DisposalMust be according to official regulations be specially treated prior to discarding

TAMIS D'ANALYSE EN ACIER INOXYDABLE, 400 MM Ø, 65 MM DE HAUT SELON ISO 3310-1

Pour le tamisage à sec et par voie humide, ouverture de maille comprise entre 20 μm et 125 mm: particulièrement léger et robuste, fabrication haut de gamme. L'acier inoxydable fortement allié protège de la corrosion et facilite le nettoyage. Les jonctions sans rainure de la toile empêchent la souillure du produit à tamiser. Tous les tamis sont mesurés avec un système optique et fournis avec un certificat d'usine.

CHOISISSEZ LES TAMIS D'ANALYSE

TAMIS D'ANALYSE EN ACIER INOXYDABLE, 200 MM Ø, 50 MM DE HAUT SELON ISO 3310-1, AVEC CERTIFICAT D'USINE

125 mm mesh width
N° 34.0040.02
Test sieve, mesh width 125 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
100 mm mesh width
N° 34.0050.02
Test sieve, mesh width 1oo mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
90 mm mesh width
N° 34.0060.02
Test sieve, mesh width 90 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
63 mm mesh width
N° 34.0000.02
Test sieve, mesh width 63 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
45 mm mesh width
N° 34.0080.02
Test sieve, mesh width 45 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
31.5 mm mesh width
N° 34.0100.02
Test sieve, mesh width 31.5 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
25 mm mesh width
N° 34.0200.02
Test sieve, mesh width 25 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
22.4 mm mesh width
N° 34.0300.02
Test sieve, mesh width 22.4 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
20 mm mesh width
N° 34.0400.02
Test sieve, mesh width 20 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
18 mm mesh width
N° 34.0600.02
Test sieve, mesh width 18 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
16 mm mesh width
N° 34.0800.02
Test sieve, mesh width 16 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
14 mm mesh width
N° 34.0900.02
Test sieve, mesh width 14 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
12.5 mm mesh width
N° 34.1000.02
Test sieve, mesh width 12.5 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
11.2 mm mesh width
N° 34.1100.02
Test sieve, mesh width 11.2 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
10 mm mesh width
N° 34.1200.02
Test sieve, mesh width 10 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
9 mm mesh width
N° 34.1300.02
Test sieve, mesh width 9 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
8 mm mesh width
N° 34.1400.02
Test sieve, mesh width 8 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
7.1 mm mesh width
N° 34.1500.02
Test sieve, mesh width 7.1 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
6.3 mm mesh width
N° 34.1600.02
Test sieve, mesh width 6.3 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
5.6 mm mesh width
N° 34.1700.02
Test sieve, mesh width 5.6 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
5 mm mesh width
N° 34.1800.02
Test sieve, mesh width 5 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
4 mm mesh width
N° 34.2000.02
Test sieve, mesh width 4 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
3.55 mm mesh width
N° 34.2100.02
Test sieve, mesh width 3.55 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
3.15 mm mesh width
N° 34.2200.02
Test sieve, mesh width 3.15

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel,with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
2.8 mm mesh width
N° 34.2300.02
Test sieve, mesh width 2.8 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
2.5 mm mesh width
N° 34.2400.02
Test sieve, mesh width 2.5 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
2 mm mesh width
N° 34.2600.02
Test sieve, mesh width 2 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
1.8 mm mesh width
N° 34.2700.02
Test sieve, mesh width 1.8 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
1.6 mm mesh width
N° 34.2800.02
Test sieve, mesh width 1.6 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
1.4 mm mesh width
N° 34.2900.02
Test sieve, mesh width 1.4 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
1.25 mm mesh width
N° 34.3000.02
Test sieve, mesh width 1.25 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
1.12 mm mesh width
N° 34.3100.02
Test sieve, mesh width 1.12 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
1 mm mesh width
N° 34.3200.02
Test sieve, mesh width 1 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
900 µm mesh width
N° 34.3300.02
Test sieve, mesh width 900 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
800 µm mesh width
N° 34.3400.02
Test sieve, mesh width 800 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
710 µm mesh width
N° 34.3500.02
Test sieve, mesh width 710 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
630 µm mesh width
N° 34.3600.02
Test sieve, mesh width 630 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
560 µm mesh width
N° 34.3700.02
Test sieve, mesh width 560 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
500 µm mesh width
N° 34.3800.02
Test sieve, mesh width 500 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
450 µm mesh width
N° 34.3900.02
Test sieve, mesh width 450 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
400 µm mesh width
N° 34.4000.02
Test sieve, mesh width 400 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
355 µm mesh width
N° 34.4100.02
Test sieve, mesh width 355 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
315 µm mesh width
N° 34.4200.02
Test sieve, mesh width 315 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
280 µm mesh width
N° 34.4300.02
Test sieve, mesh width 280 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
250 µm mesh width
N° 34.4400.02
Test sieve, mesh width 250 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
224 µm mesh width
N° 34.4500.02
Test sieve, mesh width 224 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
200 µm mesh width
N° 34.4600.02
Test sieve, mesh width 200 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
180 µm mesh width
N° 34.4700.02
Test sieve, mesh width 180 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
160 µm mesh width
N° 34.4800.02
Test sieve, mesh width 160 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
140 µm mesh width
N° 34.4900.02
Test sieve, mesh width 140 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
125 µm mesh width
N° 34.5000.02
Test sieve, mesh width 125 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
112 µm mesh width
N° 34.5100.02
Test sieve, mesh width 112 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
100 µm mesh width
N° 34.5200.02
Test sieve, mesh width 100 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
90 µm mesh width
N° 34.5400.02
Test sieve, mesh width 90 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
80 µm mesh width
N° 34.5600.02
Test sieve, mesh width 80 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
71 µm mesh width
N° 34.5800.02
Test sieve, mesh width 71 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
63 µm mesh width
N° 34.6000.02
Test sieve, mesh width 63 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mentioned mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


 


 


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data

TAMIS D'ANALYSE EN ACIER INOXYDABLE, 400 MM Ø, 65 MM DE HAUT SELON ASTM E11 Mesh

Pour le tamisage à sec et par voie humide, ouverture de maille comprise entre 20 μm et 125 mm: particulièrement léger et robuste, fabrication haut de gamme. L'acier inoxydable fortement allié protège de la corrosion et facilite le nettoyage. Les jonctions sans rainure de la toile empêchent la souillure du produit à tamiser. Tous les tamis sont mesurés avec un système optique et fournis avec un certificat d'usine.

Choisissez les tamis d'analyse

TAMIS D'ANALYSE EN ACIER INOXYDABLE, 400 MM Ø, 65 MM DE HAUT SELON ASTM E11, AVEC CERTIFICAT D'USINE

1" = 25 mm mesh
N° 34.0210.02
Test sieve, ASTM E11 mesh - 1" = 25 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
7/8" = 22.4 mm mesh
N° 34.0310.02
Test Sieve, ASTM E11 mesh - 7/8" = 22.4 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
3/4" = 19 mm mesh
N° 34.0610.02
Test sieve, ASTM E11 mesh - 1" = 19 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
5/8" = 16 mm mesh
N° 34.0810.02
Test sieve, ASTM E11 mesh - 5/8" = 16 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
0.53" = 13.2 mm mesh
N° 34.0910.02
Test sieve, ASTM E11 mesh - 0.53" = 13.2 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
1/2" = 12.5 mm mesh
N° 34.1010.02
Test sieve, ASTM E11 mesh - 1/2" = 12.5 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
7/16" = 11.2 mm mesh
N° 34.1110.02
Test sieve, ASTM E11 mesh - 7/16" = 11.2 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
3/8" = 9.5 mm mesh
N° 34.1210.02
Test sieve, ASTM E11 mesh - 3/8" = 9.5 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
5/16" = 8 mm mesh
N° 34.1410.02
Test sieve, ASTM E11 - 5/16" mesh = 8 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
0.265" = 6.7 mm mesh
N° 34.1510.02
Test sieve, ASTM E11 mesh - 0.265" = 6.7 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request. All mesh widths are also available as test sieves with 200 mm/8“ dia. Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
1/4" = 6.3 mm mesh
N° 34.1610.02
Test sieve, ASTM E11 mesh - 1/4" = 6.3 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
3 1/2" = 5.6 mm mesh
N° 34.1710.02
Test sieve, ASTM E11 mesh - 3 1/2" = 5.6 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
4 = 4.75 mm mesh
N° 34.1810.02
Test sieve, ASTM E11 mesh - 4 = 4.75 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
5 = 4 mm mesh
N° 34.2010.02
Test sieve, ASTM E11 mesh - 5 = 4 mm mesh

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
6 = 3.35 mm mesh
N° 34.2110.02
Test sieve, ASTM E11 mesh - 6 = 3.35 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
7 = 2.8 mm mesh
N° 34.2310.02
Test sieve, ASTM E11 mesh - 7 = 2.8 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
8 = 2.36 mm mesh
N° 34.2410.02
Test sieve, ASTM E11 mesh - 8 = 2.36 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
10 = 2 mm mesh
N° 34.2610.02
Test sieve, ASTM E11 mesh - 10 = 2 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
12 = 1.7 mm mesh
N° 34.2810.02
Test sieve, ASTM E11 mesh - 12 = 1.7 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
14 = 1.4 mm mesh
N° 34.2910.02
Test sieve, ASTM E11 mesh - 14 = 1.4 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange! 


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
16 = 1.18 mm mesh
N° 34.3010.02
Test sieve, ASTM E11 mesh - 16 = 1.18 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange! 


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
18 = 1 mm mesh
N° 34.3210.02
Test sieve, ASTM E11 mesh - 18 = 1 mm mesh

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange! 


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
20 = 850 µm mesh
N° 34.3410.02
Test sieve, ASTM E11 mesh - 20 = 850 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange! 


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
25 = 710 µm mesh
N° 34.3510.02
Test sieve, ASTM E11 mesh - 25 = 710 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
30 = 600 µm mesh
N° 34.3610.02
Test sieve, ASTM E11 mesh - 30 = 600 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
35 = 500 µm mesh
N° 34.3810.02
Test sieve, ASTM E11 mesh - 35 = 500 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
40 = 425 µm mesh
N° 34.4010.02
Test sieve, ASTM E11 mesh - 40 = 425 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
45 = 355 µm mesh
N° 34.4110.02
Test sieve, ASTM E11 mesh - 45 = 355 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
50 = 300 µm mesh
N° 34.4210.02
Test sieve, ASTM E11 mesh - 50 = 300 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
60 = 250 µm mesh
N° 34.4410.02
Test sieve, ASTM E11 mesh - 60 = 250 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
70 = 212 µm mesh
N° 34.4610.02
Test sieve, ASTM E11 mesh - 70 = 212 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
80 = 180 µm mesh
N° 34.4710.02
Test sieve, ASTM E11 mesh - 80 = 180 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
100 = 150 µm mesh
N° 34.4810.02
Test sieve, ASTM E11 mesh - 100 = 150 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
120 = 125 µm mesh
N° 34.5010.02
Test sieve, ASTM E11 mesh - 120 = 125 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
140 = 106 µm mesh
N° 34.5210.02
Test sieve, ASTM E11 mesh - 140 = 106 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
170 = 90 µm mesh
N° 34.5410.02
Test sieve, ASTM E11 mesh - 170 = 90 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
200 = 75 µm mesh
N° 34.5810.02
Test sieve, ASTM E11 mesh - 200 = 75 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
230 = 63 µm mesh
N° 34.6010.02
Test sieve, ASTM E11 mesh - 230 = 63 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ANALYSE DE RÉFÉRENCE
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data

Certification

Documentation IQ/OQ à remplir par l'utilisateur, aide à la qualification d'appareils dans le système de gestion de qualité, pour tamiseuse à haute performance ANALYSETTE 18.

Choisissez la certification

Certification

IQ/OQ documentation (questionnaire format - implementation not included)
N° 96.0420.00
IQ/OQ documentation (questionnaire format - implementation not included)

IQ/OQ documentation (questionnaire format - implementation by customer) for the independent utilization for the support of instrument qualification in the quality management system for the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18.


Référence
18.3020.00
Description CARACTÉRISTIQUES TECHNIQUES
Accessoires
Téléchargements Comparaison de produits
Jessica Seifert
FRITSCH GmbH - Milling and Sizing
Industriestrasse 8
55743 Idar-Oberstein
Téléphone +49 67 84 70 0
EFFECTUEZ UN TEST

ANALYSE PAR TAMISAGE GRATUITE

Faites-nous parvenir un échantillon, nous le soumettrons à une analyse par tamisage - nous vous enverrons un compte rendu individuel de tamisage.